1. The LED waterproof light bar refers to the assembly of LEDs on a ribbon-shaped FPC (flexible circuit board) or PCB hard board. Their general models are about 5730, 5050, 3528 and other common types.
2. The LED waterproof light
has a bandwidth of about 22mm, a thickness of about 8mm, and a weight of about 0.25kg/m (4 meters and one kilogram).
3. The LED waterproof light
belt has four wires, three rows of lights (note that it is not a four-row light), 24 lights per 1 meter, 24*3=72. Because the power of each light bead is 0.05W, the power of the 72-bead LED light belt is: 72*0.05=3.6W.
4. When the LED waterproof light
belt device is installed, it is usually placed in the light trough, and it can be straightened, or it can be fixed with a thin rope or thin iron wire. If you need exterior or vertical installation, you need to purchase another clip and tail plug.
5. After the LED waterproof light
device is finished, it is best to put waterproof glass glue on the tail plug and plug, so that the waterproof function is better.