With the continuous development of science and technology, modern lighting products style, more and more features. Waterproof and Dustproof Light in the general use of home decoration is relatively small, generally used in special industries, so many owners do not understand this, we first come to introduce you to waterproof Dustproof Light installation method.
First, waterproof Dustproof Light installation method
1, led waterproof soft light refers to the assembly is led to the ribbon in the FPC (flexible circuit board) or PCB hard board, their general models are about 5730,5050,3528 and so on several common types.
2, four-wire led waterproof lamp bandwidth of about 22mm, thickness of about 8mm, the weight of about 0.25kg / m (4 meters a kilogram).
3, four led waterproof light with a total of four wires, three rows of lights (note not four rows of lights Oh), each row of 1 meter 24 lights, 24 * 3 = 72. For each lamp bead power is 0.05W, 72 beads led lights with the power is: 72 * 0.05 = 3.6W.
4, led light with device, the general on the light tank, the straight up on it, you can also use a string or fine wire fixed. For external or vertical equipment, the demand for another purchase card and tail plug. The original clip is full of bright, it is best after the device in the tail plug and plug at the waterproof glass glue, so waterproof function better.
Second, waterproof Dustproof Light installation attention method
1, waterproof light belt must be equipped with a special plug (plug with a transformer); convergence is bound to remove the transparent plastic cover, then a good test light and then cover. Must not be directly connected with the lid, so easy to short-circuit!
2, each meter has a "hinge" mark, only in the mark was cut, cut or cut the wrong will lead to one meter is not bright! Some will be marked by playing some of the mark, it is best to carefully look before the cut Logo position, according to the center did not connect the local cut can be. Careful look can be seen.
