In the modern and varied decoration style, the designers and owners of all the details of the home decoration are very focused, so every kind of home decoration materials also have some specific style, Tri-proof Light is a special lamp , It is different with other lamps is that it is coated with a surface of his amount of material, can be waterproof, anti-corrosion, anti-oxidation. And therefore known as Tri-proof Light, the internal do a lot of special treatment, but also to keep the use of the circuit safe and reliable. And this kind of lamp shape nice, it is suitable for modern home decoration, the following Bai Guang lighting to talk about it to install it.
How to install Tri-proof Light
Tri-proof Light are mainly used in high-speed road tunnel, food factory, pharmaceutical factory, hospital and other wet environment, especially the dusty environment, the safety of production play a significant role.
1. Ceiling installation: first with four M8 bolts will be lifting adapter plate fixed to the lamp, the three-core cable through the G3 / 4 pipe threaded mouth, through the side of the hole and the lamp side of the introduction of the mouth, Connect to the fixture, and then twist the G3 / 4 pipe thread of the fixture with the wiring of the standard G3 / 4 pipe thread.
2. Ceiling installation: According to the installation of the lamp size, in the lamp to be installed on the location of the corresponding installation bolt holes, with M8 bolts installed fixed.
How to protect the Tri-proof Light
1. Lamps in the use of strengthening maintenance, in order to extend its service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent the invasion of moisture, so as to avoid a long time there is corrosion or leakage short circuit phenomenon; installed in the toilet, bathroom lights must be equipped with moisture-proof lamp cover, or will greatly shorten the service life; Installed in the kitchen lights should pay special attention to anti-fumes, because the accumulation of grease will affect the brightness of light; light shade better light transmission, but easy to stick ash, to be diligent to wipe, so as not to affect the penetration of light; If it is non-metallic, wet cloth can be used to avoid dust accumulation, affecting the lighting effect.
2. Moisture easily lead to rust, drop paint, but also shorten the use of lamps. Therefore, the moisture is the key to lighting maintenance, especially the bathroom, bathroom lamps and kitchen stove headlamps, should be installed moisture cover to prevent moisture intrusion, to avoid corrosion damage or leakage short circuit.
3. Light is best not to use water to clean, as long as the dry wipes can be wiped with water, if not careful to touch the water to try to dry, avoid the lights immediately after the wipe with a wet cloth.
4. When using the lamp, try not to switch frequently, because the lamp in the frequent start of the moment, through the filament current is greater than the normal working current, making the filament temperature increased sharply accelerated sublimation, which will greatly reduce its life, To minimize the switch of the lamp.